Product ID:EA 9446 PART B
MSDS Date:09/29/1989
FSC:8040
NIIN:01-175-9193
Kit Part:Y
MSDS Number: BJZZD

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 415-687-4201

Preparer: SUZANNE FRANZ

Cage: 33564

Telephone: 202-483-7616

Cage: 33564

ANILINE OLIGOMER

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:MATERIAL IS TOXIC BY INGESTION.
Explanation of Carcinogenicity:N/K *BE BONDED. FAILURE TO OBSERVE
CAUTION MAY RESULT IN EXCESSIVE HEAT BUILD-UP WITH THE RELEASE OF
TOXIC GASES.
Effects of Overexposure:IRRITATION TO UPPER RESPIRATORY TRACT.

First Aid:FLUSH SKIN AND EYE CONTACT WITH PLENTY OF WATER. WASH
THOROUGHLY WITH SOAP AND WATER, RUBBING ALCOHOL OR HAND CLEANER. DO
NOT USE SOLVENTS. IF INHALED, REMOVE TO FRESH AIR. IF INGESTED,
SEEK MEDICAL A ID. REMOVE SOILED CLOTHING AND WASH BEFORE REUSE. IF
IRRITATION PERSISTS, SEE PHYSICIAN.

Flash Point Method:TCC
Flash Point:302F,150C
Extinguishing Media:DRY CHEMICAL OR HALON FIRE EXTINGUISHER, WATER
SPRAY, FOAM OR FOG.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS WHEN
FIGHTING FIRES IN CONFINED AREAS.
Unusual Fire/Explosion Hazard:DENSE SMOKE AND TOXIC GASES MAY BE
LIBERATED.

Spill Release Procedures:WEAR PROTECTIVE CLOTHING, GLOVES AND SAFETY
GLASSES. SCRAPE UP AND TRANSFER TO METAL CONTAINER. WIPE UP
REMAINING RESIDUE WITH SOLVENTS, OBSERVING SOLVENT FLAMMABILITY
CAUTIONS.

Handling and Storage Precautions:KEEP COOL IN ACCORDANCE WITH LABEL
INSTRUCTIONS. STORE AT ROOM TEMPERATURE (77 DEG F) FOR 12 MONTHS.
Other Precautions:FOLLOW RECOMMENDED CURING SCHEDULE.

Respiratory Protection:NOT NEEDED WITH GOOD INDUSTRIAL VENTILATION.
Ventilation:LOCAL EXHAUST RECOMMENDED.
Protective Gloves:IMPERVIOUS PLASTIC OR RUBBER.
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:AS NEEDED TO PROTECT SKIN AND CLOTHING.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
AVOID CONTACT WITH SKIN AND EYES. DO NOT HANDLE OR USE UNTIL THE MSDS
HAS BEEN READ AND UNDERSTOOD.

Spec Gravity:0.97
Evaporation Rate & Reference:NIL
Solubility in Water:INSOLUBLE
Appearance and Odor:RED-BROWN LIQUID, CHARACTERISTIC ODOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Hazardous Decomposition Products:CO, NOX, ALDEHYDES, ACIDS AND
UNDETERMINED ORGANICS.
Conditions to Avoid Polymerization:AVOID MIXING RESIN AND CURING AGENT
IN BATCHES GREATER THAN 1 LB. DO NOT HEAT MIXED ADHESIVE UNLESS
CURING SURFACES TO *

Waste Disposal Methods:DISPOSE OF AS HAZARDOUS WASTE ACCORDING TO
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.